Sampling Sounds And Playing Them On The Digital Keyboard; Connection And Preparation; Sampling And Playing A Melody Sound (Melody Sampling - Casio LK-280 User Manual

Sampling Sounds and Playing Them on the Digital
Keyboard
You can use the Digital Keyboard to sample a sound from a
microphone, and then play the sound with keyboard keys. For
example, you could sample the bark of your dog and then use
the sound in a melody. The sampling feature is a great way to
create new sounds that are highly creative.

Connection and Preparation

• Turn off the microphone and the Digital Keyboard
before connecting them.
1.
Connect a microphone.
MIC IN/SAMPLING jack
• You also could connect a commercially available
microphone.
• You cannot sample sounds input from through the AUDIO
IN jack.
2.
Turn the volume levels of the Digital Keyboard
down.
3.
Turn on the microphone and then the Digital
Keyboard.
el
4.
Use (MIC VOLUME) to adjust the volume
level of microphone input.
• It will take a few seconds after you turn on the Digital
Keyboard before you will be able to use the microphone.
• Sampled sounds are recorded in monaural.
bs bs bt bt ck ck cl cl cm cm cn cn
Sampling and Playing a Melody
Sound (Melody Sampling)
Use the procedures in this section to sample a sound and play
it as the melody part on the Digital Keyboard.
• Up to five sampled sounds can be stored in Digital
Keyboard memory as tone numbers 601 through 605.
Simply select the tone number where the sound you want is
located to assign the sound to the keyboard.
To sample a sound
bn
1.
Press (TONE) and then use
enter the tone number (601 to 605) where you
want to store the sampled sound.
No sampled sound stored
N o
Lights
bo bo bn bn br br
cr cr cs cs ct ct
br
(10-key) to
D a t a
E-19