Table of Contents
Advertisement
SmartStart
The SmartStart function (only available
in selected countries) lets you define a
time period during which your tumble
dryer will start automatically. The
appliance will start on receipt of a
signal, e.g. from your energy supplier,
that indicates that the electricity rate is
particularly economical.
This function is active when the
SmartGrid setting is switched on.
The timeframe can be defined between
1 minute and 24 hours. During this
period, the tumble dryer waits for the
signal from the energy supplier. If no
signal is sent during the defined period,
the tumble dryer starts the drying
programme.
Setting the timeframe
If you have activated the SmartGrid
function in Settings, SmartStart by or
SmartFinish by will appear in the
display instead of Start at or Finish at
when you touch the sensor (see
"Settings – SmartGrid").
The procedure for setting this is the
same as for setting the Timer.
Set the time you want and confirm
with the
OK
sensor.
Touch the Start/Stop sensor to start
the drying programme with
SmartStart.
The selected programme will start
automatically, as soon as the energy
provider has sent the signal, or the
latest calculated start time has been
reached.
The procedure for changing or
deleting the SmartStart function is the
same as described for the Timer
function.
Timer
53
Advertisement
Table of Contents
