Table of Contents
Advertisement
Settings
RemoteUpdate
The RemoteUpdate function is used for
updating the software in your tumble
dryer.
RemoteUpdate is activated at the
factory.
If you do not install a RemoteUpdate,
you can continue to use your tumble
dryer in the usual way. However, Miele
recommends installing RemoteUpdates.
Activation
The RemoteUpdate menu option is
only displayed and can only be
selected if you have added your dryer
to your Wi-Fi network (see "Settings -
Miele@home").
Miele's RemoteUpdate function can
only be used if the tumble dryer is
connected to a Wi-Fi network and you
have an account in the Miele App. The
dryer must be registered in the App.
See the Miele App for terms and
conditions of use.
Some software updates can only be
carried out by Miele Service.
102
Running a RemoteUpdate
If a RemoteUpdate is available for your
dryer, it will be displayed automatically
for you.
You can choose to start the
RemoteUpdate immediately or wait until
later. If you select "Start later", the
prompt to run the RemoteUpdate will
be displayed again the next time you
switch on the dryer.
The RemoteUpdate can take several
minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
a RemoteUpdate is available.
- Once a RemoteUpdate has been
installed, it cannot be undone.
- Do not switch off the dryer during a
RemoteUpdate. Otherwise, the
RemoteUpdate will be aborted and
will not be installed.
Advertisement
Table of Contents
