Smartgrid; Remote Control - Miele TWV 780 WP Operating Instructions Manual

SmartGrid

The SmartGrid setting (available
depending on country) is only visible if
the
Miele@home
activated.
This function can be used for starting
your dryer automatically at a time
when energy rates are more
economical.
Activating SmartGrid
sensor a new function. You can set the
via the Timer sensor. The
SmartGrid
tumble dryer will then start within the
timeframe specified when it receives a
signal from the energy supplier.
If it has not received a signal from the
energy supplier by the latest start time
set, the tumble dryer will start
automatically (see "Timer").
SmartGrid is deactivated as standard.
setting is set up and
gives the Timer

Remote control

The Remote control
depending on country) is only visible if
the
Miele@home
activated.
Once the Miele App has been installed
on your mobile device, you can check
the status of your tumble dryer from
anywhere and start it remotely. You
can also control it remotely via the
MobileStart function.
You can switch off the
setting if you do not want to operate the
dryer with your mobile device.
If Remote control is not switched on the
App can cause the programme to be
cancelled.
Use the Timer sensor to set a time by
when you want to start the tumble dryer
(see "Timer").
The tumble dryer will then start within
the specified timeframe when it receives
your signal.
If it has not received a start signal by
the latest start time set, the tumble
dryer will start automatically.
Remote control is activated as
standard.
Settings
setting (available
setting is set up and
Remote control
101