Table of Contents
Advertisement
Once the wash programme has
completely finished, the Miele washing
machine transfers the programme
data via the router to which the
networked tumble dryer is also
connected, as well as transferring it to
the Miele Cloud.
The tumble dryer automatically sets a
drying programme tailored to the
laundry based on the transferred
programme data.
All you need to do is start the drying
programme once you have loaded the
tumble dryer. No further programme
settings are required on the tumble
dryer.
The drying programme must be
started within 24 hours of the end of
the wash programme. The data will be
kept available for the tumble dryer
during this period, but will be
overwritten when a new wash
programme ends.
Useful tip: Do not disconnect the
tumble dryer from the network. The
programme data transferred by the
washing machine will be received by
the tumble dryer as soon as you select
Wash2Dry.
If you have disconnected the appliance
from the network beforehand, this will
cause a delay in receiving the data.
Requirements for use
In order to use the Wash2Dry function,
the Miele washing machine and
tumble dryer must be networked using
Miele@home services.
Useful tip: Set up Miele@home as
described in "Before using for the first
time".
Selecting the
Wash2Dry function
Please wait
lights up in the display of
the tumble dryer while the wash
programme is running.
Once the washing machine programme
has completely finished, the drying
programme tailored to the laundry will
be displayed.
After the wash programme has
ended, place the clean laundry in the
tumble dryer and close the door.
To start the programme, all you need
to do is press the Start/Stop sensor
on the tumble dryer.
The programme will not start on this
tumble dryer after washing delicate
textiles (e.g. curtains) in special wash
programmes.
Wash2Dry
49
Advertisement
Table of Contents
