How To Replace The Battery Contact Pcb For Medix T22B & T24B; Slide The Stand Cap Up. Remove The Stand Cap.; Remove 4- M4 Screws. Remove System From The Stand. - Tangent Medix T22B Replacement Instructions Manual

Medix T2x Series Battery Contact PCB Replacement Instructions
How to replace the Battery Contact PCB for Medix T22B & T24B
Medical-Cart Computer: Some of the pictures in this
instructions may not be exactly the same as the product you
have but the procedures should be the same.
NOTE: PREPARE A CLEAN WORKING SURFACE TO PROTECT SYSTEM'S
DISPLAY & CASE FROM SCRATCHES & DAMAGE.
If a Stand is not installed on the unit, please skip items 1 & 2, & go directly to
item 3.

1. Slide the Stand Cap up. Remove the Stand Cap.

2. Remove 4- M4 screws. Remove system from the stand.

2