Sealing (Drawing 11); Technical Characteristics; Vehicles With Electronic Impulse Signal - Taxitronic TX80 SKYGLASS Installation Manual

INSTALLATION MANUAL TX80 SKYGLASS

7.3. SEALING (Drawing 11)

− The pulse generator installation can also be sealed, as shown in the image.

7.4. TECHNICAL CHARACTERISTICS

− The main technical characteristics of the pulse generator are:
− Sensor type:
− Number of pulses / revolution:
− Feeding voltage:
− Consumption at 5 V:

8. VEHICLES WITH ELECTRONIC IMPULSE SIGNAL

- The distance signal supplied by the car can be connected in two possible ways:
- By connecting this signal to the Green/White wire on the Power Supply cable
- By using the dedicated impulse generator connector, with a shielded cable, or even
mechanical shield, according to local regulations.
- The adaptation of the signals of the different vehicles is done by an internal electronic
circuit with the following characteristics:
•
Histheresys of the input is configurable
•
It adapts to different levels
•
Optional Pull–up
•
Optional Pull–down
•
Constante K is adjustable between 500 and 80000 km-1.
- All these adjustments are done from the tariff changer. It is necessary to unseal the
device.
Inst TX80_Skyglass_003_en.doc
Hall effect cell
4 with double impulses train
4 to 18 V
10 mA
INTERFACOM, S.A.U.
17