INSTALLATION MANUAL TX80 SKYGLASS
5.2. SKYGLASS SEALING
− Seal Nº1: Seals the taximeter box, preventing access to the electronic board..
− Seal Nº2: seals the cover of the tariff charger connector
The taximeter kit is normally ready for sealing with a sticker seal. In some regions it is
necessary to have a cable seal. If you need this kind of seal, the taximeter kit should
include an antiturn angle and screws with a hole for the cables
6. TECHNICAL CHARACTERISTICS
The general technical characteristics of TX80 SKYGLASS are as follows:
− Power supply voltage
− Maximum consumption without external lights = 1500 mA
Inst TX80_Skyglass_003_en.doc
Nominal = 12 V
Max = 30 V
Min = 10 V
INTERFACOM, S.A.U.
12