Cable Connection, Cover Closing And Pulse Generator Support - Taxitronic TX80 SKYGLASS Installation Manual

INSTALLATION MANUAL TX80 SKYGLASS
7.2.2. CABLE CONNECTION, COVER CLOSING AND PULSE GENERATOR
SUPPORT
− To connect the pulse generator cable it is necessary to open the pulse generator
cover (item 1) after taking the closing screw out and moving the cover in the right
direction indicated by the arrow. Connect the cable as indicated onitem 2 taking into
account the polarity of the connector.
− Finally put the pulse generator cover back, fix it or seal it, if it is necessary ( item 3)
and place the pulse generator in the corresponding holder.
Inst TX80_Skyglass_003_en.doc
INTERFACOM, S.A.U.
16