Download Print this page
Hide thumbs Also See for T50e:

Advertisement

Quick Links

Service Procedure Quick Reference
Power Supply
T50e
Tools & Supplies
Estimated Time
ESD Protection
Library Power
Data I/O Operations
Robotic Movement
Admin./Superuser
BlueScale Login
Not a substitute for official published procedural guide
Detailed instructions/videos located at support.spectralogic.com
Replacement
New power supply kit(s) from Spectra Logic
#2 Phillips screwdriver
USB flash drive (FAT32)
o For collecting Auto-support Log File (ASL)
20 minutes
Required
Off
If the only installed power supply in the library is being replaced
OR
If there are two installed power supplies and both are being replaced
On
If there are two installed power supplies and only one is being replaced
Discontinue
If the only installed power supply in the library is being replaced
OR
If there are two installed power supplies and both are being replaced
Verify with customer that data I/O to library has halted
Continue
If there are two installed power supplies and one is functioning normally
Discontinue
If the only installed power supply in the library is being replaced
OR
If there are two installed power supplies and both are being replaced
Verify robotic movement has been halted
Verify with customer that move requests from host have been halted
Continue
If there are two installed power supplies and one is functioning normally
No
August 2017 V2
Page 1 of 2

Advertisement

loading
Need help?

Need help?

Do you have a question about the T50e and is the answer not in the manual?

Questions and answers

Summary of Contents for Spectra T50e

  • Page 1 Detailed instructions/videos located at support.spectralogic.com Service Procedure Quick Reference Power Supply Replacement T50e  Tools & Supplies New power supply kit(s) from Spectra Logic  #2 Phillips screwdriver  USB flash drive (FAT32) o For collecting Auto-support Log File (ASL) Estimated Time...
  • Page 2 7. Verify power supply is functioning properly by checking for green DC status LED and blue AC status LED on rear of supply 8. Create an Auto-support Log File (ASL) and forward to Spectra Technical Support  Obtain permission from customer prior to performing this step ...
  • Page 3 5. Verify power supply is functioning properly by checking for green DC status LED and blue AC status LED on rear of supply 6. Create an Auto-support Log File (ASL) and forward to Spectra Technical Support  Obtain permission from customer prior to performing this step ...