Download Print this page

Kohler K-2826 Installation Manual page 5

Self-rimming/undercounter lavatories
Hide thumbs Also See for K-2826:

Advertisement

Available languages

Available languages

Marble
Foam
Padding
Wood
Screw
Anchor
Screw
3. Undercounter Installations
CAUTION: Risk of personal injury or product damage. Cast
iron lavatories are very heavy. Get help lifting the lavatory into
place.
IMPORTANT! Undercounter installations are intended to be
performed by experienced installers.
NOTE: The screws and anchors provided should be used on
countertops with a minimum 1" (2.5 cm) thickness. For thinner
countertops, use appropriate anchors and fasteners (not provided).
For Wood Countertops
Mark and pre-drill the wood screw holes at the locations shown
on the template.
Waterproof any exposed areas of wood.
For Marble/Stone Countertops
Position the countertop upside down on foam padding to protect
the surface. Mark and drill 3/8" holes 5/8" (1.6 cm) deep at the
locations shown on the template.
Use a setting tool and hammer to secure the anchors.
For All Undercounter Installations
If the countertop has not been installed, install it at this time.
Kohler Co.
Setting Tool
Anchor
Clamp
Apply
sealant.
Undercounter Installation
5
1053432-2-A

Advertisement

loading

This manual is also suitable for:

K-2827