Saving Event Logs - ION ARA Series Instrument User Manual

Simply adjust and reposition the ARA in relation to the IR Link. If you have tried this a few times and haven't
had any success, please contact ION Science.
Once the instrument is connected and has successfully been read, the settings can be changed. Click on Write
Device to save the settings to the ARA.

Saving Event Logs

The ARA stores the last 30 events. To retrieve and save the events use IR Command and connect the ARA using
IR Link then select 'Save Event Log'.
This will then transfer the last 30 events to a spreadsheet and will contain the following information.
•
Serial Number
•
Firmware Version
•
User ID
•
Life Remaining
•
Number of events
•
Duration of events
•
Number of self-tests
•
Date
•
Time
•
Bump test
•
Duration
•
Reading
•
Alarm
Unrivaled Gas Detection.
ARA Instrument User Manual V1.1
Page 21 of 28
ionscience.com/usa