Using Ara Software - ION ARA Series Instrument User Manual

NOTES:
•
The event log will be cleared when the detector is hibernated. It is highly recommended to save event
logs before hibernation.
•
To re-activate the detector from hibernation status, press and hold the button for approximately 5
seconds.
•
When the detector is in hibernation, it is powered down, the screen will be blank and will not detect
any gases.

Using ARA Software

The below shows the user options which can be
Adjusted from a PC or Laptop
•
High Alarm
•
Low Alarm
•
Calibration Interval
•
Bump Interval
•
Self-Test interval
•
User ID
•
Display
In order to communicate, the ARA needs to be in front of the IR Link.
When the ARA is in position, click 'Read Device'.
The settings will be retrieved from the device and displayed within the software.
NOTE: If the communication fails, the following message will be displayed "ARA Connect ERROR".
Unrivaled Gas Detection.
ARA Instrument User Manual V1.1
Page 20 of 28
ionscience.com/usa