Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ION TIGER LT
Summary of Contents for ION TIGER LT
- Page 1 TIGER Instrument User Manual V1.8 Unrivaled Gas Detection. Ionscience-usa.com...
- Page 2 Register your instrument online for extended warranty Thank you for purchasing your ION Science instrument. The standard warranty of your instrument can be extended to two years. To receive your extended warranty, you must register your instrument online within one month of purchase (terms and conditions apply.) Visit ionscience.com/instrument-registration.
- Page 3 TIGER LT Instrument User Manual V1.8 Warning Unrivaled Gas Detection. ionscience-usa.com Page 3 of 59...
- Page 4 TIGER LT Instrument User Manual V1.8 Avertissement Unrivaled Gas Detection. ionscience-usa.com Page 4 of 59...
-
Page 5: Table Of Contents
TIGER LT Instrument User Manual V1.8 Contents 1. Safety ............................. 8 Legal Notices Regarding the Safe Operation of Equipment ............... 8 Symbols ............................... 8 Warnings and Cautions and Information notifications ..............8 Disposal ............................... 9 2. Product Overview ......................... 10 Tiger PC Software ...........................11... - Page 6 TIGER LT Instrument User Manual V1.8 The Instruments List .........................23 Downloading Data Logged Readings and Instrument Settings .............24 Taking Snapshots ...........................25 Instrument Summary Screen ......................26 Configuration Screen ........................27 Firmware Screen ..........................31 Datalog Screen ..........................34 Snapshots Screen ...........................36 7. Calibration ..........................39 Calibration ............................39...
- Page 7 TIGER LT Instrument User Manual V1.8 Diagnostics ............................52 9. Appendix and Supporting Documents ..................53 EU Declaration of Conformity......................53 Technical Specifications ........................55 Warranty ............................56 ION Science Contact Details ......................57 UK and Head Office ........................57 USA Office ............................57 German Office ..........................57 Italian Office ...........................57...
-
Page 8: Safety
• To the extent permitted by law, ION Science shall not be liable to any person or entity for any loss or damage which may arise from the use of this manual. •... -
Page 9: Disposal
Always adhere to local regulations and procedures when disposing of the equipment. RECYCLING Recycle all Packing. WEEE REGULATIONS Ensure that all waste electrical equipment is disposed of correctly. ION Science Inc offer a take back service. Please contact us for more information. Unrivaled Gas Detection. ionscience-usa.com... -
Page 10: Product Overview
TIGER LT Instrument User Manual V1.8 2. Product Overview The TIGER is a portable gas detector that uses photoionization technology to detect a large range of Volatile Organic Compounds (VOCs) which can be dangerous from both a poisoning and explosive perspective. -
Page 11: Tiger Lt Pc Software
We recommend you install the software and set up your TIGER as described in Tiger LT PC Software. TIGER ION Science provides a range of TIGER kits and accessories. The content of a standard kit is: • TIGER instrument •... -
Page 12: Keypad Function Descriptions
Cleaning buds • Lightweight carry case For details of different kits and other accessories, contact ION Science or your local distributor. Keypad Function Descriptions The functionality of the A and B keys varies. Prompts on the display indicate their functionality at a given time. -
Page 13: Getting Started
The lights will flash white, red, then amber, and a “beep” will sound. You should also be able to hear the pump start operating. The display will initially display the ION Science logo and the firmware version installed on it. The display will then show the instrument checking that the Lamp is working (the symbol is displayed). -
Page 14: Checking The Battery Charge
TIGER LT Instrument User Manual V1.8 Checking the Battery Charge Check that your TIGER has sufficient charge for use. The battery icon should show at least two full segments. If not, the instrument should be charged to at least this level before use. -
Page 15: Understanding The Display Screen
TIGER LT Instrument User Manual V1.8 4. Understanding the Display Screen IF AN ALARM STATE IS TRIGGERED THE USER SHOULD LEAVE THE HAZARDOUS ENVIRONMENT AND ACT IN ACCORDANCE WITH NATIONAL SAFETY REGULATIONS. Overview The main central viewing screen will display readings in large numbers only, 4 digits and decimal place will display 0.0 ppm to 5,000 ppm. - Page 16 TIGER LT Instrument User Manual V1.8 Alarm Bell: When a 'Low alarm' is triggered, the bell symbol and one curved line on either side of the bell symbol will flash. When a 'High alarm' is triggered the bell symbol and two curved lines on either side of the bell symbol will flash.
-
Page 17: Soft Key Options
TIGER LT Instrument User Manual V1.8 Soft Key Options The following icons are displayed in the soft key areas as soft key options. They are selected using the Up and Down keys. These icons can be reorganized or hidden using the Tiger PC software. Refer to the... -
Page 18: Using The Tiger
When selected, the user is presented with two options: • Factory: You can set your instrument to operate using the factory calibrated values. These are set by ION Science Inc or authorized service centers. • Custom Custom calibration should be carried out as part of regular instrument maintenance. - Page 19 TIGER LT Instrument User Manual V1.8 • Sound Refer to the Tiger PC Configuration Screen topic for details of these options. Select the preferred option with the Up and Down keys and confirm with Enter. For percentage volume, press Enter again to confirm selection. The frame will flash. Use the Up and Down keys to change the percentage volume and press Enter to confirm the chosen value.
- Page 20 TIGER LT Instrument User Manual V1.8 Second screen Date of Factory Calibration Date of Custom Calibration Third screen SPAN 1 PID output (ppm) MiniPID 2 Sensor PID Sensor A/D reading Fourth screen Internal Reference Number Firmware version Bootloader version Battery type and voltage...
-
Page 21: Using The Tiger Lt Pc Software And Downloading Data
TIGER LT Instrument User Manual V1.8 6. Using the Tiger PC Software and Downloading Data The Tiger PC software enables you to fully configure the instrument. PC Requirements Tiger PC Software must be used in conjunction with a PC or laptop using Windows 10. -
Page 22: Opening Tiger Lt Pc
TIGER LT Instrument User Manual V1.8 Opening Tiger Before opening Tiger PC, connect your TIGER to the PC. Double-click the Tiger icon on your desktop or in the Start menu to open Tiger PC (or run Tiger.exe in the installation folder). The Home page will be displayed: Unrivaled Gas Detection. -
Page 23: Help Screen
TIGER LT Instrument User Manual V1.8 Help Screen This screen will inform you if a new version of PC software is available. You can then install the upgrade if required. We recommend that Tiger PC is kept up to date to ensure that the latest functionality is available to you. -
Page 24: Downloading Data Logged Readings And Instrument Settings
TIGER LT Instrument User Manual V1.8 Downloading Data Logged Readings and Instrument Settings Click Instrument(s). The page that is then displayed lists the instruments that Tiger PC has previously listed. To download data from the connected instrument (and to add it to the instrument list if it hasn’t been listed with Tiger PC before) click Read. -
Page 25: Taking Snapshots
TIGER LT Instrument User Manual V1.8 Taking Snapshots The first time you “read” an instrument a snapshot is taken automatically (see Snapshots Screen). On subsequent occasions this pop-up is displayed: Click Yes or No as required. To take a snapshot of a connected instrument at any time, click on the IRN of the instrument in the Instrument(s) list, then click Take Snapshot on the screen that is then displayed. -
Page 26: Instrument Summary Screen
TIGER LT Instrument User Manual V1.8 Instrument Summary Screen Once an instrument has been read, expand its entry in the menu and click on Summary to display Instrument Summary screen. This screen shows the current status and properties of your... -
Page 27: Configuration Screen
TIGER LT Instrument User Manual V1.8 Configuration Screen Use this screen to configure your TIGER Backlight Choose from: • Permanently off • Permanently on • On in low ambient light • On for limited time Enter time for the limited time option in the field provided (1 - 99 seconds). - Page 28 TIGER LT Instrument User Manual V1.8 Sound The following options are available: • Key press sounds • Audible alarms • “Crescendo”, i.e. the volume of the low level alarm sound increases as the upper alarm level is approached • Alarm Latch: alarms continue to sound, even if the gas level falls below the threshold, until the Esc key is pressed.
- Page 29 TIGER LT Instrument User Manual V1.8 Sleep during PC connect • When connected to a PC the instrument will go into Sleep Mode. The instrument will “awaken” when disconnected from the PC. Zeroing The following options are available: • When selected, the TIGER will automatically set its Zero reading based on ambient air when it is switched on.
- Page 30 TIGER LT Instrument User Manual V1.8 Select one of the following: • The instrument will alarm when the memory log is full. Logging will stop. • Logging will continue. New data will overwrite the oldest data in the log. Clock Select 24- or 12-hour format.
-
Page 31: Firmware Screen
TIGER LT Instrument User Manual V1.8 Firmware Screen This screen displays the current firmware version installed on your TIGER and provides facilities to install new versions on the instrument. If new firmware is available, this will be noted on the screen in the box under the current firmware version: “New firmware is available”. - Page 32 TIGER LT Instrument User Manual V1.8 The following message is displayed: To continue, click Yes. The following message is displayed: Check that the instrument is connected and click Yes. Important: Do not operate your TIGER during the update process. Unrivaled Gas Detection.
- Page 33 TIGER LT Instrument User Manual V1.8 The firmware will now be sent to the TIGER . A bar at the bottom of the screen will indicate the progress of the update. The new firmware version will be shown on the screen.
-
Page 34: Datalog Screen
TIGER LT Instrument User Manual V1.8 The firmware is now installed on the instrument. It will then restart automatically. Datalog Screen This screen is used to view data logged readings downloaded from your TIGER , if a relevant upgrade has been installed. - Page 35 TIGER LT Instrument User Manual V1.8 Click on a session. Details of the data collected during that session are presented in numerical and graphical form on the Datalog screen. Use the menu accessed from the Menu button in the top right-hand corner of the window to zoom, print, or export the data.
-
Page 36: Snapshots Screen
TIGER LT Instrument User Manual V1.8 Snapshots Screen A snapshot records the calibration settings of your TIGER at a point in time. If required, your TIGER can be reset to a snapshot’s settings. The Snapshots screen lists those stored on the PC. - Page 37 TIGER LT Instrument User Manual V1.8 Click Restore against the relevant snapshot. On the restore pop-up that is then displayed: Click Yes to load the snapshot. When the loading is complete, click Close and restart your TIGER Your TIGER will now be restored to the settings and calibration data stored at the time of that snapshot.
- Page 38 TIGER LT Instrument User Manual V1.8 Expand the menu until the relevant snapshot is displayed. Double-click on the snapshot. All the data stored in that snapshot can now be viewed. Click Delete to remove a selected snapshot. Unrivaled Gas Detection.
-
Page 39: Calibration
TIGER scales its linear output across a Zero level (clean air reference) and the SPAN 1 user- defined gas concentration. Due to the linear output of the ION Science MiniPID 2 Sensor, a two-point calibration is often adequate. Custom Calibration... - Page 40 TIGER LT Instrument User Manual V1.8 Custom Calibration Procedure From the main running screen, Press the Options soft key on your TIGER to access the adjustable features. Then use the Up or Down key to select calibration. Press Enter to confirm selection.
-
Page 41: Maintenance
TIGER LT Instrument User Manual V1.8 Maintenance Inadequate performance of the gas detection equipment described in this manual may not necessarily be self-evident and consequently equipment must be regularly inspected and maintained. Do not use abrasive or chemical detergents to clean the instrument as this may reduce the antistatic properties of the materials used, clean it using a damp cloth only. -
Page 42: Tiger Lt Parts Diagram
, a rechargeable Lithium-ion Battery Pack and a non- rechargeable AA Alkaline Battery Pack for 3 AA Alkaline batteries. • The rechargeable Lithium-ion Battery Pack is recommended for normal operation. The TIGER is supplied with it as standard. Unrivaled Gas Detection. -
Page 43: Recharging Batteries
IP20 when its Battery Pack is removed so avoid changing batteries in dusty or wet environments. Lithium Ion Batteries can be damaged if left in a discharged state. Please recharge if battery indicator is showing empty. Please note also that if the instrument is left for one year unused, it needs to be charged fully before it can continue to be kept in storage. -
Page 44: Replacement Of Rechargeable Battery Packs
TIGER LT Instrument User Manual V1.8 The battery icon on the TIGER will display the level of charge: Battery empty When the battery is nearly empty, the icon will flash for one minute before the instrument shuts down. Battery fully charged... -
Page 45: Replacement Of Non-Rechargeable Batteries
TIGER LT Instrument User Manual V1.8 3. Release the clip at the rear of the instrument and lift the Rechargeable Battery Pack away from the Instrument Body while sliding it slightly backwards: 4. Reverse the previous step to slide the replacement battery pack into the Instrument Body and secure it using the clip. -
Page 46: Inlet Probe Assembly
TIGER LT Instrument User Manual V1.8 9. Replace the Instrument Boot ensuring that it is snug around the front of the Instrument Body and the lights are not obscured. WEEE REGULATIONS Dispose of used batteries in accordance with all local and national safety and environmental requirements. -
Page 47: Water Ingress
TIGER LT Instrument User Manual V1.8 Water Ingress If the instrument has been immersed or splashed with water, take the PID 2 Sensor out to dry (see below) and replace the PTFE Filter Disc as described previously. Lamp Cleaning and Electrode Stack Replacement The TIGER is a sensitive detector. -
Page 48: Lamp Removal And Examination
TIGER LT Instrument User Manual V1.8 Before Lamp cleaning or replacement, the the MiniPID 2 Sensor must be removed. First ensure that the TIGER is turned off and that you are in a clean environment so that the sensor parts will not be contaminated by dust, oil or grease. -
Page 49: Lamp Cleaning
THE LAMP CLEANING COMPOUND CONTAINS ALUMINIUM OXIDE AS A VERY FINE POWER. THIS MAY CAUSE IRRITATION OF RESPIRATORY TRACT AND EYES. (CAS Number 1344-28-1). A full material safety data sheet MSDS is available on request from ION Science Inc. The key issues are listed below. Handling: •... -
Page 50: Replacing A Lamp
TIGER LT Instrument User Manual V1.8 3. Continue polishing until an audible “squeaking” is made by the cotton bud with compound moving over the window surface (usually within fifteen seconds). 4. Remove the residual powder with a short blast of air from the can of clean, dry, oil free air. - Page 51 TIGER LT Instrument User Manual V1.8 Visually check the condition of the Lamp detection window (the upper flat surface of the Lamp). If this needs cleaning, proceed as detailed later. Place the Electrode Stack onto a clean, flat surface, flat surface downwards. Carefully twist the detection window end of the Lamp into the O-ring around the well in the underside of the Electrode Stack.
-
Page 52: Troubleshooting
System error Total system failure The instrument’s firmware is corrupted. In the unlikely event of this message appearing, contact ION Science Inc or your nearest authorised service centre. Unrivaled Gas Detection. ionscience-usa.com... -
Page 53: Appendix And Supporting Documents
TIGER LT Instrument User Manual V1.8 10. Appendix and Supporting Documents EU Declaration of Conformity Manufacturer: ION Science Ltd, The Hive, Butts Lane, Fowlmere, Cambridge, UK. SG8 7SL Product: PhoCheck TIGER Product description: Intrinsically safe photoionisation gas detector for detecting volatile organic compounds... - Page 54 TIGER LT Instrument User Manual V1.8 ION Science Ltd has sole responsibility, on the date this product accompanied by this declaration is placed on the market, the product conforms to all technical and regulatory requirements of the above listed directives.
-
Page 55: Technical Specifications
• Intrinsically Safe Approvals II 1G Ex ia IIC T4 Ga • Tamb = - 15 oC ≤Ta ≤+45 oC (with Lithium ion Battery Pack) • Tamb = - 15 oC ≤Ta ≤+45 oC (with Alkaline Battery Pack) • ITS09ATEX26890X IECEx ITS 10.0036X •... -
Page 56: Warranty
TIGER LT Instrument User Manual V1.8 Weight & dimensions - Instrument weight: 0.75 kg Size: 465 mm (18.3”) H x 89 mm (3.5”) W x 61 mm (2.4”) D Warranty Standard Warranty can be extended to up to 2 years on the TIGER... -
Page 57: Ion Science Contact Details
TIGER LT Instrument User Manual V1.8 ION Science Contact Details UK and Head Office USA Office ION Science Ltd ION Science Inc The Hive, Butts Lane 4153 Bluebonnet Drive Fowlmere Stafford Cambridge TX 77477 SG8 7SL Tel: +1 877 864 7710... -
Page 58: Manual Log
TIGER LT Instrument User Manual V1.8 Manual Log Instrument Manual version Amendment Issue Date Firmware Software V1.1.0.2 V1.0 Manual created 16/06/15 V0.5.02 Reference to survey mode removed (page8) V1.1.0.3 V1.1 18/09/15 V0.5.09 Part number descriptions updated (page37) V1.1.0.3 V1.2 New probe design. Pages 33, 36 and 37 27/01/2016 V0.5.09... - Page 59 Page numbers amended, PPM amendment to custom calibration section (p34), V1.1.0.3 Temperatures updated on Technical Spec V1.7 14/03/2019 V0.5.09 (p41) V1.1.0.10 Page layout adjustments, updated Tiger LT PC V1.8 06/07/2020 V0.5.12 screenshots Unrivaled Gas Detection. ionscience-usa.com Page 59 of 59...