Connections - Quest Engineering M35 Owner's Manual

M35(t) / M65(t)

Connections

Choose input wire and connectors
INPUT : Connect microphones or balanced line-level sources to mixer-amplifier balanced inputs.
Set Gain volume accordingly. Connect unbalanced line-level signals to RCA input connectors.
OUTPUT : Maintain proper polarity on output connectors.
For each output channel, connect the output EURO block terminals to the loudspeaker loads.
Use terminals marked COM and 4Ω / 8Ω for a loudspeaker load, or use terminals marked 25V,
70V, COM for constant-voltage speaker loads.
Connect the COM terminal to speaker negative(-) lead; connect one of the other terminals to
speaker positive(+) lead.
The impedance and output voltage are same as following Table 2.1
M35(t)
M65(t)
NOTE : Impedances indicated in the table 2.1 represent the total speaker system impedances.
Speaker connection is shown in Figure 2.2
4Ω / 11.8V 8Ω /16.7V
4Ω / 16V 8Ω / 22.8V
[ Table 2.1 Output voltage and impedance ]
[ Figure 2.2 How to connect speakers ]
140Ω / 70V 17.8Ω / 25V
75Ω / 70V 9.6Ω / 25V
Connections
7