Using Reverb; Change Split Point; Using Chorus - Casio Keyboard WK-500 User Manual

Controlling the Keyboard Sounds
5.
cp
Pressing again to unsplit the keyboard (so it
plays only the tone you selected in step 1).
cp
• Each press of toggles between split (two tones) and
unsplit (one tone).
Disappears
• If you turn on both layer and split, layering will be applied to
the right side range of the keyboard only.
To change the split point
1.
While holding down
where you want the split point to be.
The key you press will become the lowest note of the right
side range of the split keyboard.
Example: Setting middle C (C4) as the split point.
Key name
C 4
E-14
cp
, press the keyboard key

Using Reverb

Reverb adds reverberation to notes. You can change the
duration of the reverb.
1.
ct
Press and then use the
and [6] ( ) keys to display "Reverb" (page
E-6).
R e v e r b
2.
bs
Use the (10-key) [–] and [+] keys to select the
reverb setting you want.
Off (oFF) Turns off reverb.
1 to 10 The larger the number selected, the longer
the reverb duration.
R e v e r b
Indicator disappears when reverb is turned off.

Using Chorus

Chorus is a function that adds depth and breadth to notes. It
makes you sound as if you are playing multiple instruments.
1.
ct
Press and then use the
and [6] ( ) keys to display "Chorus" (page
E-6).
C h o r u s
2.
bs
Use the (10-key) [–] and [+] keys to select the
chorus type you want.
There are five chorus types, plus an off setting.
C h o r u s
Indicator disappears when chorus is turned off.
• The actual effect produced by chorus depends on the tone
you are using.
bs
(10-key) [4] ( )
bs
(10-key) [4] ( )