Casio Keyboard WK-500 User Manual page 26

Sampling Sounds and Playing Them on the Digital Keyboard
Protecting Against Accidental Deletion of
Sampled Sounds
You can use the following procedure to protect each sampled
sound against accidental deletion.
1.
bp
Press and then use
tone number of the sampled tone you want to
protect.
2.
ct
Press and then use the
and [6] ( ) keys to display "SAMPLING" (page
E-6).
3.
bs
Press the (10-key) [7] (ENTER) key.
4.
bs
Use the (10-key) [4] (
to display "Protect".
P r o t e c t
5.
bs
Press the (10-key) [+] key to turn on
protection.
Once protected a tone cannot be deleted.
A protected tone is indicated as shown below.
Protected
* 1 : O r
■ Saving Sample Data on an External Device
• SD memory card (WK-500 only) (page E-61)
• Computer (page E-68)
■ Maintaining Sampled Sound Data in Memory
After you save sampled sound data in memory, it will remain
there as long as power is supplied to the keyboard. However,
if you disconnect the AC adaptor when there are no batteries
loaded, sampled sound data will be deleted.
Tips for Maintaining Data
• Use both batteries and the AC adaptor together.
• Make sure that batteries with sufficient power are loaded
whenever you disconnect the AC adaptor.
• Connect the AC adaptor to the keyboard and plug it into a
power outlet before replacing batteries.
Before connecting or disconnecting the AC adaptor or
replacing batteries, first press
E-24
bs
(10-key) to enter the
bs
(10-key) [4] (
) and [6] ( ) keys
n l
g
1
to turn off power.
)