Vibrato Delay (4Eh); Portamento Control (54H); Reverb Send (5Bh) - Casio PX-3BK Implementation Manual

9.19

Vibrato Delay (4EH)

Format
Message Format: BnH 4EH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note 1:
For information about the relationship between setting values and send/receive values, see "27.6 –64 - 0 - +63 Setting
Value Table" in "Part VII Setting Values and Send/Receive Values".
Send
Sent when the vibrato delay is specified by a zone edit operation.
Receive
Receipt changes Vib Auto Delay of the LFO Parameter.
9.20

Portamento Control (54H)

Format
Message Format: BnH 54H vvH
n: MIDI Channel Number
kk: Source Note Number
Send
See "1.3.3 MIDI Send by Assignable Buttons".
Receive
Receipt of this message first stores the Source Note Number for the next note. When the next Note On is received, the
portamento effect is applied to the note using this Source Note Number as the pitch start point and the Note On event key
number as the end point. If there already is a note being sounded by Source Note Number at this time, the new note on
is not performed and the portamento effect is applied to the pitch of the note being sounded. That is to say that legato
play is performed.
9.21

Reverb Send (5BH)

Format
Message Format: BnH 5BH vvH
n: MIDI Channel Number
vv: Value
Send
Sent when reverb send is specified by a zone edit operation.
Receive
Receipt changes the Rev Send Part Parameter.
19