Cutting And Placing Thermal Pads - EK-Quantum Vector2 Trio RTX 3070 Ti D-RGB Quick Start Manual

CUTTING AND PLACING THERMAL PADS

Thermal Pad F – 1.0 mm (120 x 16 mm)
120 mm
Thermal Pad G – 1.5 mm (120 x 24 mm)
120 mm
Thermal Pad - 120 x 16 x 1.0 mm
F1
F1 F1
1 mm
1.5 mm
STEP 1
F1
F1
F1
STEP 2
Your EK-Quantum Vector
with Thermal Pads that have to be cut into smaller pieces to cover all
the VRM components. EK made sure to provide you with more than
an adequate quantity of Thermal Pads to complete this Step.
CAUTION: You must remove the protective foil from both
sides of the thermal pad before installation.
Replacement thermal pads:
Thermal Pad F 1.0 mm – (120 x 16 mm) EAN: 3830046996732
Thermal Pad G 1.5 mm – (120 x 24 mm) EAN: 3830046996787
For this step, you will need:
Scissors
STEP 2
The cardboard is printed in scale 1:1. Cut Thermal Pads to the
size printed on the cardboard. Once cut to the size, Thermal Pads
should be placed on the GPU PCB, as shown in the picture.
- 8 -
TRIO RTX 3070 Ti D-RGB block comes
2