Download Print this page

EK-Quantum Vector2 Trio RTX 3070 Ti D-RGB Quick Start Manual page 10

Gpu water block

Hide thumbs Also See for Vector2 Trio RTX 3070 Ti D-RGB:

Table of Contents

STEP 2

Use six (6) M2.5 x 4 AX1 Screws and PVC washers to tighten the

M2.5 x 4 AX1 SCREW

PCB on the water block. Tighten the screws evenly using the

M2.5 PVC WASHER

Phillips head screwdriver.

EK recommends you start tightening the screws around the GPU core

first, and then continuing outward to prevent damage to the GPU.

For this step, you will need:

Phillips Head Screwdriver

Screws must be present in the places marked on the picture.

STEP 2

- 10 -

Table of Contents

Need help?

Do you have a question about the Vector2 Trio RTX 3070 Ti D-RGB and is the answer not in the manual?

Vector2 strix rtx 3070 ti d-rgb