Table of Contents
Advertisement
Vega ASV-1 Operating Manual
3.4 Start / Stop flight display
3.5 Altitude Bug
Press the F1/Up button during the altitude "TAPE" display to access the altitude bug setting screen. Press the F1/Up key
to set the altitude bug to the current altitude or use the rotary control to adjust the altitude bug. Press the F2/Down key to
change the increment / decrement unit to 50 or 500. Press the rotary control to exit and save.
The bug will be yellow when in the display screen and cyan when either above or below the limits of the display.
3.6 Timers display
3.7 Maximum Airspeed display
This display can be accessed by pressing the F2/Down button during the normal
display mode.
This display can be accessed by pressing the F2/Down button during the normal display
mode. Press the F1/Up button when the max values display is showing to reset the
maximum values to the current airspeed.
Note: The maximum airspeed is stored in non-volatile
memory and is recalled on power-up.
Press the F1/Up button during the normal display mode
to manually start/stop a flight. This key is only active if
the ASV-1 is setup to select the manual flight option
under the "TIMERS" setup menu.
Page 5
Advertisement
Table of Contents
