Altitude Bug - Vega ALT-5 Operating Manual

Vega ALT-5 Operating Manual Page 3
3.2 Altitude "CLASSIC" Display
Altitude Value
Altitude unit
VSI scale indication
VSI (Vertical Speed Indication)
VSI Value
VSI unit
Local pressure readout (Either in mB or in "HG)

3.3 Altitude Bug

Press the F2/Down button during the altitude "TAPE" display to access the altitude bug setting screen. Press the F1/UP
key to set the altitude bug to the current altitude or use the rotary control to adjust the altitude bug. Press the F2/Down
key to change the increment / decrement unit to 50 or 500. Press the rotary control to exit and save.
Press the F1/Up button during the normal altitude "TAPE" display to enable or disable the altitude bug. The bug will be
yellow when in the display screen and cyan when either above or below the limits of the display.