fantastic furniture Avenue Assembly Instructions Manual page 5

Step 1
You will need
4 x Short Bolts
( H2 )
Allen key
( H4 )
Into corner
Attach 2 x front legs ( P3 ) to the corresponding holes on the seat ( P2 ) as shown.
Secure together using 4 x short bolts ( H2 ) and 4 x washers ( H3 ),tightening using allen key ( H4 ).
Do not fully tighten the bolts. Leave them a little loose at this stage.
Step 2
You will need
1 x Short Bolts
( H2 )
Allen key
( H4 )
Align the seat ( P2 ) to back frame ( P1 ) as shown.Secure together using 1 x short
bolt ( H2 ) and 1 x washer ( H3 ),tightening using allen key ( H4 ).
Do not fully tighten the bolts. Leave them a little loose at this stage.
fantasticfurniture.com.au
Note
a soft surface to minimise the risk of damaging the chair.
4 x Washers
( H3 )
( P3 )
( P2 )
1 x Washers
( H3 )
( H3 )
we strongly recommend assembling the chair on
:
( H2 )
( P3 )
( H3 )
( H2 )
Note Leg goes flush
:
into corner
( P2 )
( P1 )
Page 5