Download Print this page

Cessna 172S Pilot Operating Handbook page 82

Hide thumbs Also See for 172S:

Advertisement

SECTION 9 - S UPPLEM ENTS
SUPPLEMENT 6 - FAA APPROVED
There is no change to airplane l i mitations when the KR
is installed.
EMERGENCY PROCEDURES
There are no changes to the basic airplane emergency
procedures when the KR
TO OPERATE AS AN AUTOMATIC DIRECTION FINDER:
1 . OFFNOL Control -- ON.
Frequency Selector Knobs -- SELECT desired frequency in
the standby frequency display.
2.
3. FRO Button -- PRESS to move the desired frequency from the
standby to the active position.
4. ADF Selector Switch (on audio control panel) -- SELECT as
desired .
5. OFFNOL Control -- SET to desired volume level and identify
that desired station is being received .
6. ADF Button -- SELECT ADF mode and note relative bearing
on indicator.
ADF TEST (PRE-FLIG HT or I N-FLIGHT):
ADF Button -- SELECT ANT mode and note pointer moves to
900 position.
1 .
ADF Button -- SELECT ADF mode and note the pointer moves
without hesitation to the station bearing.
2.
sluggishness, wavering or reversals i ndicate a signal that is
too weak or a system malfunction .
86-8
SECTION 2
LIMITATIONS
SECTION 3
ADF is installed .
87
SECTION 4
NORMAL PROCEDURES
C ESSNA
MODEL
1 728
ADF
87
Excessive pointer
July
8/98

Advertisement

loading

This manual is also suitable for:

172suslog10