Cessna 172S Pilot Operating Handbook page 105

CESSNA
MODEL 172S
2) If the D-Bar is less than 2 to 3 dots: the HDG mode will dis­
engage upon selecting
will illuminate and the capture/track sequence will automati­
cally begin.
d. Airspeed --
(recommended).
MISSED APPROACH
1. AlP DISC -- PRESS to disengage AP.
2. MISSED APPROACH -- EXECUTE.
3. AP Button -- PRESS (if AP operation is desired).
annunciator ON. Select optional lateral modes as desired.
BE FORE LANDING
1. AlP DISC Switch -- PRESS to disengage AP.
There is no change to the airplane performance when the
KAP1 40 Autopilot is installed.
May 30/00
SUPPLEMENT 7 - FAA APPROVED
REV
90 KIAS during autopilot approaches
MAINTAIN
SECTION 5
PERFORMANCE
SECTION 9 - SUPPLEMENTS
mode; the
REV
S7-1 9/(S7-20 blank)
annunciator
I
I
Note ROL