Baicells Neutrino430 Installation Manual page 9

NOTE 1: Legacy Gen 1 CPEs do not support SAS.
NOTE 2: This installation guide only covers the basic configuration of a single cell for
verifying that the eNB unit is operational during the process of installation. More
detailed configuration guides are available on the Baicells website:
Baicells.com > Resources > Documents:
• CloudCore Configuration & Network Administration Guide (OMC/BOSS)
• CPE Configuration Guide
• eNodeB Configuration Guide
• Carrier Aggregation & Dual Carrier (Split Mode) Configuration Guide
• HaloB User Guide
• SAS Deployment Guide
In addition to the Neutrino430 eNB two carriers and multiple operating modes, the following is a
list of other key features. The Neutrino430 datasheet providing technical specifications is kept up-
to-date on the Baicells website.
• Supports standard LTE TDD band 48, and partial bands 42 and 43 (3550–3700 MHz)
Complies with 3GPP Release 15 standards
•
Supports 5/10/15/20 MHz bandwidth per carrier
•
Provides excellent Non-Line-of-Sight (NLOS) coverage
•
Peak rate is a configurable parameter using special Subframe Assignment (SA):
•
o 2x20 MHz, per carrier:
SA1: DL 80 Mbps, UL 28 Mbps

SA2: DL 110 Mbps, UL 14 Mbps

o 2x10 MHz, per carrier:
SA1: DL 40 Mbps, UL 14 Mbps

SA2: DL 55 Mbps, UL 7 Mbps

• Supports 96 concurrent users per carrier [x2 carriers (96+96) if operating in DC mode];
upgradeable to higher capacity in future software releases
• Supports TR-069 network management interface
• Can be accessed via GUI-based local and remote Web management
• Connects to any IP-based backhaul, including public transmission
• Is lightweight and uses low power consumption to reduce OPEX
• Compact, plug-and-play device with Self-Organizing Network (SON) capabilities
• Can be used for Internet of Things (IoT) with all mainstream Evolved Packet Core (EPC)
vendors
• Integrated high-gain internal antenna; optional external Global Positioning System (GPS)
antenna
• Integrated small cell form-factor for quick and easy installation
• Configured out-of-the-box to work with Baicells CloudCore
• Supports both Carrier Aggregation (CA) and Dual Carrier (DC) modes
9