Baicells Neutrino430 Installation Manual page 3

Indoor 4x250mw two-carrier tdd enodeb
Hide thumbs Also See for Neutrino430:
Table of Contents

Advertisement

Resources
Documentation - Baicells product data sheets, this document, and other technical
manuals can be found at Baicells.com > Resources > Documents.
Support - How to open a support ticket, process an RMA, and the Support Forum are at
Baicells.com > Support.
Contact Us
5700 Tennyson Pkwy, #300, Plano, TX 75024, USA
+1-888-502-5585
sales_na@Baicells.com
https://na.Baicells.com
Safety Information
For the safety of installation personnel and the protection of the equipment from damage, please
read all safety warnings. If you have any questions concerning the warnings, before installing or
powering on the base station, contact the
WARNING: IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury.
Before you work on any equipment, be aware of the hazards involved with electrical
circuitry, and be familiar with standard practices for preventing accidents
WARNING: Read the installation instructions before you connect the system to its power
source.
WARNING: Equipment installation must comply with local and national electrical codes.
WARNING: This product relies on the existing building or structure for short-circuit
(overcurrent) protection. Ensure that the protective device is rated no greater than 20A.
WARNING: Do not operate this wireless network device near unshielded blasting caps or in
an explosive environment unless the device has been modified and qualified for such use.
WARNING: To comply with the United States Federal Communications Commission (FCC)
radio frequency (RF) exposure limits, antennas should be located at a minimum of 20
centimeters (7.9 inches) or more from the body of all persons.
Baicells Technologies North America, Inc.
North America
or
support_na@Baicells.com
Baicells support
3
team.

Advertisement

Table of Contents
loading

Table of Contents