6.28. Disassembly Piezo Unit (SP7)
• Refer to "Disassembly of Net Frame Assembly"
• Refer to "Disassembly of Front Panel Block"
• Refer to "Disassembly of SMPS Unit"
• Refer to "Disassembly of Top Ornament Assembly"
• Refer to "(Step 1) - (Step 6) of item 6.27"
Step 1 : Remove Glue.
Caution : After replacement of new Piezo Unit, please
ensure to apply glue and check for air leakage.
Step 2 : Desolder the red (+) speaker wire and black (-)
speaker wire.
Step 3 : Remove the Piezo Unit (SP7).
6.29. Disassembly Passive Radiator
(SP3)
• Refer to "Disassembly of Net Frame Assembly"
• Refer to "Disassembly of Front Panel Block"
• Refer to "Disassembly of SMPS Unit"
• Refer to "Disassembly of Top Ornament Assembly"
• Refer to "(Step 1) - (Step 6) of item 6.27"
Step 1 : Remove 4 screws.
Step 2 : Remove Passive Radiator (SP3).
54