Panasonic SC-HC05GN Service Manual page 13

connected Mode
8 ON: BT
connected Mode
9 ON: BT
connected Mode
3. Energy Savings Operation
3.1 Energy Star compliance
The unit must comply to Energy star 2.0 requirement and implement APD (Auto Power Down)
function.
Press and hold "Ok "key to switch between APD OFF and APD ON at Bluetooth mode or Aux
mode. But the APD function only valid for iPod and Aux mode.
During main set be APD ON and user no any operations and no any audio input in iPod or Aux
mode, the main set will Power off after 29minutes 30 seconds.
APD turn ON - Blink white 2 times (Turn ON both Blue/Green LED).
APD turn OFF - Blink white 1 time (Turn ON both Blue/Green LED).
When APD ON and 1minute before the set is turn OFF, Red LED continuously blinking.
APD default is APD ON.
4. Cold Start Factory Default
4.1 Cold start operation
The unit can be reset to Factory Default settings by performing cold start (Reset)
During this process, all peripherals will be initialized. Device name stored in
Bluetooth module will also be cleared
This can be done by press and hold the Power button more than 15 second on panel
while insert AC power simultaneously.
pause/Sleep
mode
Talking Any key
mode press
from main
set or RC
iPhone Press
pause/Sleep selector
mode key
BT LED On
NA BT mode,
BT LED On
NA Aux Mode,
BT LED Off
13
previous condition
display
Show No effect to phone
caller's info operation
Pause BT led off