Panasonic SC-HC05GN Service Manual page 49

Step 3 : Detach 2P Wire (Speaker Wire L) at the connector
(CN300) on the Main P.C.B..
Step 4 : Release 2P Wire (Speaker Wire L) from the guides.
Caution : During assembling, ensure the 2P Wire (Speaker
Wire L) is dressing properly onto the guides as shown.
Step 5 : Using a Flathead screwdriver to lift up the Speaker
Panel L Assembly.
Step 6 : Remove 4 screws.
Step 7 : Detach 2P Wire (Speaker Wire L) from the groove.
Caution : During assembling, ensure the 2P Wire (Speaker
Wire L) is dressing properly onto the groove as shown.
Step 8 : Release Front Speaker (SP2) from the Speaker Panel
L Assembly.
Caution : During assembling, ensure the Front Speaker
(SP2) is seated properly onto the guides as shown.
49