Table of Contents
Advertisement
Thank you for purchasing this product.
Please read these instructions carefully before using this product,
and save this manual for future use.
Included Installation Instructions (l 2, 3 and 18, 19)
The installation work should be done by a qualified installation specialist.
Before commencing work, carefully read these installation instructions and the operating
instructions to ensure that installation is performed correctly.
(Please keep these instructions. You may need them when maintaining or moving this unit.)
Model number suffix "EB" denotes UK model.
EB
Operating Instructions
Compact Stereo System
Model No. SC-HC39DB
RQT9941-1B
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Panasonic SC-HC39DB
Summary of Contents for Panasonic SC-HC39DB
- Page 1 Operating Instructions Compact Stereo System Model No. SC-HC39DB Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Included Installation Instructions (l 2, 3 and 18, 19) The installation work should be done by a qualified installation specialist.
-
Page 2: Caution For Ac Mains Lead
Caution for AC Mains Lead Safety precautions (For the AC mains plug of three pins) WARNING For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin Unit mains plug for your safety and convenience. ≥... -
Page 3: Table Of Contents
Accessories Battery ≥ Danger of explosion if battery is incorrectly replaced. Check the supplied accessories before using this unit. Replace only with the type recommended by the manufacturer. ∏ 1 Remote control ≥ Mishandling of batteries can cause electrolyte leakage and (N2QAYB000944) may cause a fire. -
Page 4: Control Reference Guide
Control reference guide Standby/on switch (Í/I) (Í) Top view Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. Select the audio source On this unit: “CD”... -
Page 5: Connections
Connections Connect the antenna. This unit can receive DAB/DAB+ and FM stations with the DAB antenna. Adhesive tape (not supplied) Be sure to tighten the nut DAB indoor antenna fully. (supplied) Connect the AC mains lead after all other connections are completed. This unit consumes a small amount of AC power (l 20) even when turned off. -
Page 6: Inserting Media
Inserting media ∫ Connecting a USB device ≥ Insert the USB device directly. Do not use any USB extension cable. ≥ Please disconnect the USB device if you finish using. ≥ Before removing the USB device, select a source other than “USB”. ∫... -
Page 7: Bluetooth ® Operations
Press [3, 4] to select “OK? YES” and then press installation of the app “Panasonic Music Streaming” [OK]. (free of charge). Enter “Panasonic Music Streaming” in the search box To pair with a device of Google Play to search, and then select “Panasonic Music Streaming”. - Page 8 Bluetooth transmission mode Disconnecting a Bluetooth device ® ® You can change the transmission mode to prioritise While a Bluetooth device is connected: ® transmission quality or sound quality. Press [PLAY MENU] repeatedly to select Preparation “DISCONNECT?”. ≥ Press [ ] to select “BLUETOOTH”.
-
Page 9: Media Playback Controls
Media playback controls Playback modes ( [CD] [USB] The following marks indicate the availability of the Select the playback mode. feature. CD audio in CD-DA format and a CD that [CD]: Press [PLAY MENU] to select “PLAYMODE” or contains MP3 files (l 17) “REPEAT”. -
Page 10: Listening To Dab/Dab
Listening to DAB/DAB+ Presetting DAB/DAB+ stations Preparation You can preset up to 20 DAB/DAB+ stations. ≥ Make sure that the DAB antenna is connected. (l 5) ≥ Turn the unit on. Preparation Press [RADIO/AUX] repeatedly to select “DAB/DAB+”. Memorising stations While listening to a DAB broadcast Press [OK]. - Page 11 Display ≥ If broadcasting stations are memorised, proceed to Press [DISPLAY] to change the display. “To re-scan DAB/DAB+ stations” to memorise stations on other frequency blocks. (l 10) The information will scroll through the display. ≥ If “SCAN FAILED” is still displayed, repeat steps 1 to 3 until a Each time you press the button: station is memorised.
-
Page 12: Listening To Fm Radio
Listening to FM radio ∫ Manual tuning and presetting Select a radio broadcast. You can preset up to 30 channels. Press [PLAY MENU] repeatedly to select “TUNEMODE”. Preparation Press [3, 4] to select “MANUAL” and then press ≥ Make sure that the antenna is connected. (l 5) [OK]. -
Page 13: Sound Adjustment
Sound adjustment Play timer The following sound effects can be added to the audio You can set the timer so this unit turns on at a certain output. time every day. Press [SOUND] repeatedly to select the effect. Preparation Set the clock. Press [3, 4] to select the setting and then press [OK]. -
Page 14: Others
Changing the unit and remote control code Auto off function When other Panasonic equipment responds to the As a factory default, this unit will turn to standby mode supplied remote control, change the remote control automatically if there is no sound and it is not being code. -
Page 15: Troubleshooting
Troubleshooting Before requesting service, make the following checks. If No response when [1/;] is pressed. you are uncertain about some of the check points, or if the ≥ Disconnect the USB device and then reconnect it. Alternatively, solutions indicated in the following guide does not resolve turn the unit off and on again. -
Page 16: Unit And Media Care
Unit and media care Messages Pull out the AC mains lead from the outlet before The following messages or service numbers may maintenance. appear on the unit’s display. ∫ Clean this unit with a soft, dry cloth “--:--” ≥ When dirt is heavy, wring a wet cloth tightly to wipe the dirt, ≥... -
Page 17: About Bluetooth
® ≥ Do not use this system near an equipment or in an Bluetooth SIG, Inc. and any use of such marks by Panasonic environment that is sensitive to radio frequency Corporation is under license. -
Page 18: Attaching The Unit To A Wall (Optional)
Safety precautions (not supplied) Professional installation is required. The installation should never be done by any other than a qualified installation specialist. PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING. WARNING:... - Page 19 Measure and mark the position of both sides of the Hook the unit securely onto the wall mount wall mount brackets. brackets with both hands. ≥ Use figures below to identify the screwing positions. ≥ Connect the antenna and the AC mains lead to the unit The position to attach the wall mount brackets before hanging the unit onto the wall.
-
Page 20: Specifications
Specifications ∫ DISC SECTION Disc played (8 cm or 12 cm) ∫ GENERAL CD, CD-R/RW (CD-DA, MP3* Pick up Power consumption 26 W Wavelength 790 nm (CD) Power consumption in standby mode* 1, 2 Approx. 0.2 W ∫ SPEAKER SYSTEM SECTION (When “BLUETOOTH STANDBY”... - Page 21 Declaration of Conformity (DoC) Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Customers can download a copy of the original DoC to our R&TTE products from our DoC server: http://www.doc.panasonic.de...
- Page 22 RQT9941...
- Page 23 RQT9941...
- Page 24 ≥ Or go on line through our Internet Accessory ordering application at www.pas-europe.com. ≥ Most major credit and debit cards accepted. ≥ All enquiries transactions and distribution facilities are provided directly by Panasonic UK. ≥ It couldn’t be simpler! ≥ Also available through our Internet is direct shopping for a wide range of finished products. Take a browse on our website for further details.
Need help?
Do you have a question about the SC-HC39DB and is the answer not in the manual?
Questions and answers
CD stops and starts as if dirty but I have cleaned everything thoroughly.
The Panasonic SC-HC39DB CD player may stop and start despite thorough cleaning due to several possible reasons:
1. Unsupported Disc Format – The inserted CD may not be in CD-DA or MP3 format, which the unit can play.
2. Scratched or Damaged Disc – Even if cleaned, scratches or damage can cause playback issues.
3. Lens Issues – If the lens is dirty or faulty, it may struggle to read the disc properly.
4. USB/Disc Errors – If using a USB device, the files may be corrupted, requiring formatting.
5. Unit Malfunction – Turning the unit off and on again may resolve temporary issues.
If the problem persists, further troubleshooting or service may be needed.
This answer is automatically generated