Stanley DUBUIS BPP060F User Manual page 14

TOOL USAGE DATA
The Tool Usage Data tab displays information about individual tool cycles.
1. Displays the total number of tool cycles, as well as completed and incomplete cycles.
1. The data log shows each cycle, up to 250,000 cycles. Each entry into the log includes;
• Date and time of each crimp
• If the cycle completed successfully
• Amperage and Voltage of the tool during each crimp
• Tool temperature at the end of each crimp
2. Data log sorting filters. Allows you to sort the crimp data in the data log.
WORKSITE REPORTS
14 ► BPP060F User Manual
CRIMP SOFTWARE
1
2
1
3