Using The Tool - Stanley DUBUIS BPP060F User Manual

USING THE BPP060F
Set the Trigger Lock BEFORE inserting
or removing dies from the Crimping Head.
Set the trigger lock.
Pull out the jaw pin and open the crimping
jaw. Put the connector with the cable inserted
between the dies. Close the crimping jaw and
lock the jaw pin into place
Release the trigger lock.
Note: Release the trigger to immediately
stop the tool. Press the pressure release
at any time to open the jaws.
10 ► BPP060F User Manual

USING THE TOOL

DO NOT CRIMP LIVE CABLES
Crimping Jaw
Jaw Pin
Insert battery.
Press and hold the trigger until the die is crimped.
The InteLED flashing green : good crimping.
Press and hold the pressure release until the
return of the piston. Open the crimping jaw.
KEEP HANDS CLEAR OF
THE MOVING PARTS
GOOD POSITION OF
THE CONNECTOR
BAD POSITION OF
THE CONNECTOR
Pressure release
Trigger