Ec Declaration Of Conformity - Evolution R150 RCP-Li Original Instructions Manual

EC DECLARATION OF CONFORMITY

The manufacturer of the product covered by this Declaration is:
UK: Evolution Power Tools Ltd, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
FR: Evolution Power Tools SAS, 61 Avenue Lafontaine, 33560, Carbon-Blanc, Bordeaux, France.
The manufacturer hereby declares that the machine as detailed in this declaration fulfils all
the relevant provisions of the Machinery Directive and other appropriate directives as detailed
below. The manufacture further declares that the machine as detailed in this declaration, where
applicable, fulfils the relevant provisions of the Essential Health and Safety requirements.
The Directives covered by this Declaration are as detailed below:
2006/42/EC
Machinery Directive.
2014/30/EU.
Electromagnetic Compatibility Directive,
2011/65/EU. &
The Restriction of the Use of certain
2015/863/EU.
Hazardous Substances in Electrical Equipment (RoHS) Directive
2012/19/EU.
The Waste Electrical and Electronic Equipment (WEEE) Directive.
And is in conformity with the applicable requirements of the following documents
EN 62841-1:2015 • EN 62841-2-11:2016/A1:2020 • EN 55014-1:2017+A11:2020
EN 55014-2:2015
Product Details
Description: R150RCP-Li CORDLESS RECIPROCATING SAW
Evolution Model No:
104-0001
Brand Name: EVOLUTION
Voltage: 18V d.c.
The technical documentation required to demonstrate that the product meets the requirements of
directive has been compiled and is available for inspection by the relevant enforcement authorities,
and verifies that our technical file contains the documents listed above and that they are the correct
standards for the product as detailed above.
Name and address of technical documentation holder.
Signed:
Date:
UK: Evolution Power Tools Ltd, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
FR: Evolution Power Tools SAS, 61 Avenue Lafontaine, 33560, Carbon-Blanc, Bordeaux, France.
www.evolutionpowertools.com
Print: Barry Bloomer - CEO
05/10/21
12