RC Factory Complete set Yak 55 Instructions Manual page 3

Fold the parts and load them evenly. You can use books, for example. Leave the parts for about 1-2 hours. In the
meantime, prepare a space to build the plane. You will need a free table. Since the plane is primarily glued, it is
good to cover the table with a piece of plastic, which will protect the table and prevent the airplane from
sticking to the table.
Prepare the electronics. Unpack the servos, radio with receiver and ESC. Put batteries in the radio. If the radio is
not paired with the receiver, pair them.
On the radio, put the throttle down and switch all the switches to the upper position. Press and hold the bind
button and turn on the radio. RXBinding should appear on the display.
3