Other Messages - Roland RD-700NX Owner's Manual

Indication
Error 30
The internal memory capacity of the
RD-700NX is full .
Error 40
The instrument can't deal with the excessive
MIDI data .
Error 41
A MIDI cable has been disconnected .
Error 43
A MIDI transmission error has occurred .
Error 51
System error . Repeat procedure, or power off ,
then on .
Error 65
The USB Memory port was subjected to
excessive current .
(*) The RD-700NX cannot read RD-700SX setup fi les.

Other Messages

Indication
Unavailable while in Rec Mode
File Exists . Overwrite OK?
Panel is Locked
Types of audio fi les that the RD-700NX can play
WAV
Sampling Frequency 44.1 kHz
Bit Depth 16-bit
File Extension
".wav"
MP3
Format MPEG-1 audio layer 3
Sampling Frequency 44.1 kHz
32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 kbps, VBR (Variable
Bit Rate
Bit Rate)
File Extension ".mp3"
Caution when Playing Back Audio Files
Playing back an MP3 fi le or changing the playback tempo of an audio fi le places a signifi cant processing burden on the RD-700NX, and in some
cases may cause it to be unable to completely process all of the performance data from the keyboard.
If this occurs, you may be able to solve the problem by taking the following actions.
• Use WAV format data rather than MP3 format data
• Return the song tempo to its original setting (to 0%)
Situation
The internal memory capacity of the RD-700NX
is full.
The RD-700NX cannot deal with the excessive
MIDI data sent from the external MIDI device.
A MIDI cable has been disconnected.
A MIDI transmission error has occurred.
There may be a problem with the system.
The USB MEMORY connector was subjected to
excessive current.
Situation
This is displayed when the [MIDI] button is
pressed with Rec Mode "ON. "
A fi le with the same name is already exists.
The panel is locked.
Action
–
Reduce the amount of MIDI data sent to the
RD-700NX.
Connect it properly and securely.
Check the MIDI cable and connected MIDI
device.
Repeat the procedure from the beginning. If it
is not solved after you have tried several times,
contact the Roland service center.
Make sure that there is no problem with the
external media, then turn the power off , then
on again.
Action
When Rec Mode is "ON, " you cannot change
the MIDI settings. To make changes to the MIDI
settings, set Rec Mode to "OFF" (p. 86).
If you execute the procedure, the fi le will be
overwrite.
If you don't want to overwrite, change a
fi lename.
Press the [EXIT/SHIFT] button to cancel Panel Lock
(p. 36).
Material
95