Roland RD-700NX Owner's Manual page 56

Parameter Value
VRL (Velocity
1–127
Range Lower)
VRU (Velocity
1–127
Range Upper)
Sns (Velocity
-63–+63
Sense)
Max (Velocity
1–127
Max)
V .Reserve (Voice
0–64
Reserve)
Dp
F1
F2
PB
Md
S1 ON, OFF
S2
LW2
LW1
UP2
UP1
Description
This specifies the lower limit (VRL) and upper limit (VRU) of the range in which the tone is played according to the velocity.
Make this setting when you want the tone to change depending on the key velocity.
This setting is disregarded with certain tones.
This setting determines how the volume changes in response to the velocity.
The volume is increased as the keyboard is played with greater force when a positive value is used; when a negative value is
selected, the volume decreases as the keys are played with greater force.
This setting is disregarded with certain tones.
Maximum velocity value for the corresponding key.
Lowering this value will produce softer notes even if you play the keyboard strongly.
This setting is disregarded with certain tones.
Specifies the number of voices that will be reserved for each layer if you attempt to play more than 128 voices.
Specifies whether the damper pedal will (ON) or will not (OFF) control each layer.
Specifies whether the pedal connected to the FC1 jack will (ON) or will not (OFF) control each layer.
Specifies whether the pedal connected to the FC2 jack will (ON) or will not (OFF) control each layer.
Specifies whether the pitch bend lever will (ON) or will not (OFF) control each layer.
Specifies whether the modulation lever will (ON) or will not (OFF) control each layer.
Specifies whether the [S1] button will (ON) or will not (OFF) control each layer.
Specifies whether the [S2] button will (ON) or will not (OFF) control each layer.
Specifies whether the control slider (LW2) will (ON) or will not (OFF) control each layer.
Specifies whether the control slider (LW1) will (ON) or will not (OFF) control each layer.
Specifies whether the control slider (UP2) will (ON) or will not (OFF) control each layer.
Specifies whether the control slider (UP1) will (ON) or will not (OFF) control each layer.
Making Detailed Settings for Tones
57