Advertisement
Attaching the power supply
1. Insert the power supply's connector into the printer power jack or load a fully
charged battery in the printer
2. Plug the other end of the AC power cord into the wall socket.
Do not plug the AC power cord with wet hands or operate the
printer and the power supply in an area where they may get wet.
Serious injury may result from these actions!
Connecting your printer to a host (computer)
Make sure the host (computer) is powered on. Connect one end (mini-B) of the USB
cable to the USB (mini-B) port of the printer and then the other end (type-A) of the
USB cable to the USB (type-A) port of the host.
Turning on your printer
It is the best practice to turn on the printer after your printer is connected to the host
(computer) and the host is powered on.
Installing printer utility
1. Download the printer utility from ARGOX global website and start the installation
process.
2. Locate the installation file and click it.
3. Here, in the printer utility dialog box, click Next.
1
Advertisement
