Assembly - ATIKA ALA 2500 Original Instructions Manual

Description
1. Hopper opening for material to be shredded
2. Reset button / motor protection
3. On / Off switch
4. Direction of rotation selector switch
5. Power supply plug
6. Ventilation slots
7. Carriage
8. Ejection slot

Assembly

8
 Remove all parts from the
packaging.
 Mount each of the two
supporting legs with
washers (No. 8) and self-
locking nuts (No. 2) using the
nut wrench supplied on the
housing.
 Mount the wheel axle (No. 3)
with the 2 screws M6 x 50 (No.
4), washers and nuts using the
socket wrench and nut wrench
supplied on the carriage.
 Push the wheels (No. 5) onto
the axle.
 Fasten the wheel cover (No. 6)
in the wheel axle using a
hammer.
two
11