Microprocessor - Lenovo Legion Tower 5i Hardware Maintenance Manual

5. Remove the Y light assembly.
6. Perform the removal procedure in reverse to reinstall a new FRU.

Microprocessor

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
The heat-sink-and-fan assembly and microprocessor might be very hot. Before you open the computer
cover, turn off the computer and wait several minutes until the computer is cool.
Notes:
• Your microprocessor sockets might look slightly different from the illustrations in this topic.
• Do not touch the pins on the microprocessor socket or the gold contacts on the microprocessor.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 50.
2. Remove the left side cover. See "Left side cover and right side cover" on page 50.
70
Lenovo Legion Tower 5i (26L, 7) Hardware Maintenance Manual