6. Remove the storage drive tray.
7. Perform the removal procedure in reverse to reinstall a new CRU.
Memory module
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 50.
2. Remove the left side cover. See "Left side cover and right side cover" on page 50.
3. Disengage the tabs on the memory modules.
4. Remove the memory module.
5. Perform the removal procedure in reverse to reinstall a new CRU.
.
Chapter 6
Hardware removal and installation
55