Gainsborough K204 Quick Manual

20pc Mushroom Solar Stake Lights
K204
v001: 06/10/21
Please read and retain these instructions for future reference
Dimensions
EACH MUSHROOM IS 20CM HIGH INC GROUND STAKE
TOTAL Length: 5.8m
LIGHT STRING: 380cm
2M CABLE FROM SOLAR PANEL TO THE FIRST MUSHROOM IN THE LIGHT STRING
Material: Plastic
Batteries required: 1.2V AA 300mAH Ni-MH rechargeable (included)
LED bulbs not replaceable
•
THERE ARE 20 SOLAR MUSHROOMS IN TOTAL EACH WITH A STAKE TO FIX THEM INTO THE
GROUND
•
EACH MUSHROOM IS 20CM APART FROM EACH OTHER
•
AUTOMATICALLY ILLUMINATES AT DUSK
•
LIGHTS SETTINGS OF ON/ OFF/ FLASHING
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Before using first time
Allow solar panel to charge for at least 8 hours in full sunlight with the ON/OFF switch in the ON position.
The ON/OFF switch is located under the solar panel. Once the batteries are fully charged, set the ON/OFF
switch to ON. If the lights do not turn on after dark refer to Maintenance section.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
Caution: Locate where the lights will not create a trip hazard.
To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging garden
stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake first
ALWAYS POSITION IN DIRECT SUNLIGHT