Gainsborough Elephant H306 Instructions

Elephant Solar Light
H306
v001: 20/11/20
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
There are metal tubes on each leg to insert ground stakes where required. To easily insert stakes into the
ground, it is recommended to wet the ground first. To avoid damaging garden stakes when inserting into the
ground, select a spot in soft, rock-free soil. Insert the base of the stake first then gently insert the rest of the
stake into the base. DO NOT push directly against the solar cell or the ornament housing containing the
actual LED light.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
ALWAYS POSITION IN DIRECT SUNLIGHT
Dimensions
38 x23 x38cm
Material: Metal and plastic
•
A REAL STATEMENT PIECE
•
THE ELEPHANT HAS BEEN CRAFTED WITH A
SCROLL EFFECT ACROSS ITS BODY WHICH AT
NIGHT WHEN LIT UP CREATES A BEAUTIFUL
PATTERN ACROSS THE GROUND
•
WHITE LED (not replaceable)
•
2 GROUND STAKES INCLUDED TO SECURE HIM
INTO THE GROUND
•
SOLAR POWERED
•
SIMPLE ON/ OFF SWITCH FOR THE LIGHTS
POSITIONED ON THE POLE
Battery: 1x Ni-MH AA 600mAh 1.2V
1x 7 coloured LED Lights (not replaceable)