Brother DCP9040CN Quick Start Manual page 9

DCP9040CN, DCP9045CDN, MFC9440CN & MFC9840CDW
8. If resistance is encountered when pushing the frame assembly into position, the shaft keys are not
aligned properly. Align the ends of the feed and separation roller shafts as needed (figures 5 and 6).
9. Once the feed and separation roller shafts have been aligned and the feed frame assembly has been
pushed completely to the left side of the printer, release the roller holder.
10. Test the installation:
NO PAPER FEED Message, Clicking Noise
March 3, 2008
Figure 5
Figure 6
Page 9 of 10
SERVICE
UPDATE No.
F1249