Brother DCP9040CN Quick Start Manual page 8

DCP9040CN, DCP9045CDN, MFC9440CN & MFC9840CDW
7. The goal is to apply only enough pressure to the roller holder assembly to allow the lift arm to rest
between LM hook A and LM hook B
Important: If the Left Arm does not go in between the A&B it will not work.
Note: If the roller holder is pushed too far up or not far enough, it will miss this area.
Caution: If the Lift Arm is not inserted properly, the machine will make the original loud noise, and the
machine will not lift the paper tray nor will feed paper.
NO PAPER FEED Message, Clicking Noise
March 3, 2008
(in red) in figure 4.
Figure 4
Page 8 of 10
SERVICE
UPDATE No.
F1249