Data Length; Encoding Format - Marson MT8495 User Manual

Send All*
Send End Only

6.5.2 Data Length

Set Start Length
Start/End Length can be 0 to 255 digits, converted into two-digit hex value (00
~ FF) during configuration. Please refer to Appendix C – ASCII Table for
corresponding hex value.
Example: to set Start Length as 2
1. Convert 2 to Hex equivalent as 02
2. Scan Set Start Length
3. Scan 0, 2 respectively from 8.1 Data 0~F
4. Scan Save Configuration from 8.2 Save & Abort

6.6 Encoding Format

Below are output encoding format options. Please note that GBK is used for
Notepad, UNICODE for Microsoft Word, and raw for serial data output.
GBK*
___________________________________________________________________________________
MT8495 User's Manual V1.0
Send Start Only
Send Center Only
Set End Length
38
UTF8