Table of Contents
Advertisement
Changing LCD Confirmation Time
When you press the shutter button to take a picture in
the shot image appears on the LCD monitor. You can select the time for
confirming the image after shooting from 0 sec., 1 sec., 2 sec., 3 sec., 4 sec.
and 5 sec.
q Set the mode dial to [
w Press the
[LCD CONFIRMATION].
e Press the
image confirmation time (0 SEC., 1
SEC., 2 SEC., 3 SEC., 4 SEC., 5 SEC.)
and press the ENTER button.
• If you select 0 sec. for the image confirmation time, the shot image will
Note
not be displayed on the LCD monitor.
• The shot image will be displayed until recording is completed,
regardless of the preset image confirmation time, when in
picture) mode with sound, non-compressed (NC) or PRO (PRO, PRO-
L, PRO-H) mode, or
Auto Power Off Setting
The camera will turn off automatically (auto power off) in recording and play
modes to conserve the battery if it is left idle (no buttons or switches operated)
for the preset time. You can select from 1 min., 3 min., 5 min., and OFF for the
time until the auto power off function is activated.
q Set the mode dial to [
w Press the
[AUTO POWER OFF].
e Press the
preset time (1 MIN, 3 MIN, 5 MIN, OFF)
and press the ENTER button.
If you select OFF, the auto power off function
will be disabled.
100
].
or
button to select
or
button to select the
(text) mode.
].
or
button to select
or
button to select the
(still picture) mode,
SET
FORMAT
SERIAL TRANSFER
KEEP SETTINGS
LCD CONFIRMATION
AUTO POWER OFF
SELECT:
CHANGE:
SET
FORMAT
SERIAL TRANSFER
KEEP SETTINGS
LCD CONFIRMATION
AUTO POWER OFF
SELECT:
CHANGE:
1/3
1SEC.
1MIN
SEL.:ENTER
(still
1/3
1SEC.
1MIN
SEL.:ENTER
Advertisement
Table of Contents
