Checking The Position Of The Subject - Ricoh RDC-7 Operation Manual

Checking the Position of the Subject

Check the position of your subject through the viewfinder or on the LCD monitor.
Viewing Through the Viewfinder
Aim the camera at the subject while looking through the viewfinder.
Shooting Scope
Frame the subject within the viewfinder.
Short Distance Correction Frame
Compose your subject within this range when the
distance to the subject is less than about 24cm.
Autofocus Field
Located in the center of the viewfinder and
roughly corresponding to the area shown on the
right, the autofocus field determines the focal
distance.
Viewing on the LCD Monitor
Aim the camera at the subject while looking at the LCD monitor.
Shooting Scope
Frame the subject within the LCD monitor
screen.
Autofocus Field
Located in the center of the LCD monitor
screen and roughly corresponding to the
area shown on the right, the autofocus field
determines the focal distance.
• The shaded area and dotted lines are shown for illustration purposes
Note
only and do not actually appear in the viewfinder or on the LCD
monitor.
2
45