Ricoh Caplio R40 User Manual page 90

Note
• When shooting with S-CONT or M-CONT, the ISO setting is fixed at [AUTO] even if it is set
to [ISO 64] or [ISO 100].
• The maximum number of images that can be shot in the Multi-Shot Mode depends on the
image size setting, as shown in the table below.
• The numbers of images that can be shot in the Multi-Shot Mode with the internal memory
are as shown in the table below.
Digital Zoom: Off
Digital Zoom: On
• The shot images can be recorded normally until the SD memory card becomes full. Once
the number of consecutively shot images exceeds the number of images shown in the table
above, however, the image recording speed becomes slow. (This depends on the image
size setting.)
1.
Switch the Mode Selector to 5.
2.
Press the C/D button.
The Shooting Setting menu is displayed.
3.
Press the " button to select [CONT. MODE] and press
the $ button.
4.
Press the !" buttons to select
[CONT.], [S-CONT], or [M-CONT].
5.
Press the C/D or # button.
6.
If you pressed the # button in Step 5, press also the
C/D button.
The Shooting Setting menu closes and
the Multi-Shot symbol appears on the
screen.
88
F2816 N2816 F3:2
5 5 5
5 5 5
F2048 N2048 F1280
5 5 13
5 5 13
N1280 N640
13 13
13 13