About The Software; Other Problems - Ricoh Caplio R40 User Manual

About the Software

For details about the software, refer to the "Software User Guide"
(PDF file).

Other Problems

Problem
Cannot load the SD
memory card.
The camera does not
operate even when the
buttons are pressed.
The date is incorrect.
The set date disappeared. The battery was removed.
Auto Power Off does not
work.
The beep sound cannot
be heard.
Images do not appear on
the TV.
164
Cause
The card is facing the wrong way.
Battery is running low.
Camera malfunction.
The correct date/time are not set.
Auto Power Off is set to [OFF].
The beep sound volume is turned off. Use [VOL. SETTINGS] to set the
The VIDEO OUT MODE setting is
incorrect.
The AV cable is not connected.
The TV is not correctly set to VIDEO
IN.
Solution
Load correctly.
Charge the rechargeable battery or
use the AC adapter.
Press the POWER button to turn the
camera off, and then press the
POWER button to turn the camera on
again.
Remove the battery and load it again.
Reconnect the AC adapter cable
properly, if using.
Set the correct date/time.
If the battery is removed for about one
week, the date setting will be lost.
Make the settings again.
Set the time for Auto Power Off.
volume to a setting other than mute.
Set it to the correct format.
Connect the AV cable properly.
Check that the TV is correctly set to
VIDEO IN.
Refer to
P.20
P.16
P.19
P.169
P.22
P.20
P.169
P.120
P.120
P.114
P.116
P.122
P.47
-